Burkert Type 8112 Bedienungsanleitung PDF herunterladen (Seite 20)

6 Set up

6.1 General information

The ﬁgures in brackets refer to the following illustrations.

The switching condition of the electronics can be checked with closed

housing cover (control lamp). In the basic setting, products with a

density > 0.7 g/cm³ (0.025 lbs/in³) can be detected. For products with

lower density, the sw itch must be set to > 0.5 g/cm³ (0.018 lbs/in³).

On the electronics module you will ﬁnd the following indicating and

adjustment elements:

l Signal lamp (1)

l DIL switch for mode adjustment - A/B (2)

l DIL switch for sensitivity adjustment (3)

Note:

For test purposes, immerse the tuning fork of LEVEL SWITCH 8112

always in liquids. Do not test the function of LEVEL SWITCH 8112 with

your hand. This can damage the sensor.

6.2 Adjustment elements

Fig. 12: Oscillator SWE60R - Relay output

1 Signal lamp (LED)

2 DIL switch for mode adjustment

3 DIL switch for sensitivity adjustment

Control lamp for indication of the switching status

l green = relay energized

l red = relay deenergized

l red (ﬂashing) = failure

Func

tion/Conﬁguration

Sig

nal lamp (1)

20 LEVEL SWITCH 8112 • - Relay (DPDT)

6 Set up

32050-EN-120418

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Keine Kommentare

Burkert Type 8112 Bedienungsanleitung Seite 20