Burkert Type 6281 Bedienungsanleitung PDF herunterladen (Seite 2)

1 OPERATING INSTRUCTIONS

The operating instructions contain important information.

▶ Read the operating instructions carefully and follow the safety instruc-

tions in particular, and also observe the operating conditions.

▶ Operating instructions must be available to each user.

▶ The liability and warranty for the product / device are void if the operat-

ing instructions are not followed.

1.1 Symbols

▶ Designates an instruction to prevent risks.

→ designates a procedure which you must carry out.

Warning of injuries:

Danger!

Imminent danger! Serious or fatal injuries.

Warning!

Potential danger! Serious or fatal injuries.

Caution!

Danger! Minor or moderately severe injuries.

Warns of damage to property:

note!

2 INTENDED USE

Incorrect use of the solenoid valve can be dangerous to people,

nearby equipment and the environment.

▶ The device type 6213 EV / 6281 EV is designed to control, shut off

and meter neutral media up to a viscosity of 21 mm

/s.

▶ Provided the cable plug is connected and installed correctly, e.g.

Bürkert Type 2508, the device satisfies protection class IP65 in

accordance with DIN EN 60529 / IEC 60529.

▶ Use according to the permitted data, operating conditions and con-

ditions of use specified in the contract documents and operating

instructions.

▶ Correct transportation, correct storage and installation and careful use

and maintenance are essential for reliable and problem-free operation.

▶ Use the device only as intended.

2.1 Restrictions

If exporting the device, observe any existing restrictions.

2.2 Definition of term

In these operating instructions, the term “device” always refers to the

Type 6213 EV / 6281 EV.

english

Risk of injury due to malfunction of valves with alternating

current (AC).

Sticking core causes coil to overheat, resulting in a malfunction.

▶ Monitor process to ensure function is in perfect working order.

Risk of short-circuit/escape of media through leaking screw

joints.

▶ Ensure seals are seated correctly!

▶ Carefully screw valve and connection lines together!

To prevent injury, ensure that:

▶ Do not make any external modifications to the device bodies.

Ensure that the system cannot be activated unintentionally.

▶ Installation and repair work may be carried out by authorized techni-

cians only and with the appropriate tools.

▶ After an interruption in the power supply or fluidic supply, ensure

that the process is restarted in a defined or controlled manner.

▶ Do not put any loads on the body.

▶ The general rules of technology apply to application planning and

operation of the device.

3 BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any

• contingencies and events which may arise during the installation,

operation and maintenance of the devices.

• local safety regulations - the operator is responsible for observing

these regulations, also with reference to the installation personnel.

Danger - high pressure!

▶ Before loosening the pipes and valves, turn off the pressure and

vent the pipes.

Risk of electric shock!

▶ Before reaching into the device or the equipment, switch off the

power supply and secure to prevent reactivation!

▶ Observe applicable accident prevention and safety regulations for

electrical equipment!

Risk of burns/risk of fire if used for a prolonged switch-on time

through hot device surface!

▶ Keep the device away from highly flammable substances and media

and do not touch with bare hands.

english

3.1 Warranty

The warranty is only valid if the device is used as intended in accordance

with the specified application conditions.

3.2 Information on the internet

The operating instructions and data sheets for type 6213 EV / 6281 EV

can be found on the internet at:

www.buerkert.com

Type 6213 EV / 6281 EV

4 TECHNICAL DATA

4.1 Operating conditions

The following values are indicated on the type label:

▶ Voltage (Tolerance ± 10 %) / Current type

▶ Coil power consumption (active power in W - at operating

temperature)

▶ Pressure range

▶ Body material: Brass (MS), Stainless steel (VA)

▶ Seal material: FKM, EPDM, NBR

Operating principle:

A (NC)

2/2-way valve, normally

closed

B (NO)

2/2-way valve, normally

opened

Protection class: IP65 with accordance with DIN EN 60529 / IEC

60529 with cable plug, e. g. Bürkert Type 2508

english

Type 6213 EV / 6281 EV

1 2 3 4 5 6 7 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Burkert Type 6281 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Burkert Type 6281